I am hearing lots of comments about “it being so wet, I can’t get my yard mown”. This cool, wet

spring and early summer has been perfect growing weather for our cool season lawns. When it

seems to rain every day, it can become a challenge to keep up with the growth. So what do you

do when the lawn can’t be cut because of constant rain?

The first step is to wait until the grass is dry before you mow. Trying to cut wet grass will result

in the clippings clumping together instead of being evenly distributed across the lawn. These

clumps can cause the grass underneath to die as well as providing a place for diseases, mold and fungi to grow. It also will collect under the mower deck reducing the quality of the cut as the

underside of the mower fills up – and it is a pain to clean! If the tires of the mower are wet as

you mow, the lawn is too wet to cut.

The second step is to set your mower as high as possible and bring the length of the grass down in steps over several mowings. It is always best never to take more than one third of the grass blade off at one time. If more is taken, the plant reacts by using stored energy reserves to

quickly send up new growth. This reduces the amount of energy available for the plant to deal

with stress or damage done by insects or disease. The plant will need the stored energy if/when

the weather turns off hot and dry to help it survive the summer.

However, sometimes it is just not possible to keep the “one-third rule.” In such cases, cut as high as possible even though it may mean you are cutting off more than one third of the blade. Bring the height down gradually by cutting more often and at progressively lower heights until you reach the target height. It may take 2-3 cuttings just a couple of days apart before you reach your normal mowing height. Although the more frequent mowings are extra work, your lawn will

thank you and you will be much happier with the outcome.

A lawn mown to the correct height will be thicker and healthier resulting in fewer weeds. What

is a good height to keep your grass? Here is a list of the recommended mowing height ranges (in inches) for home lawns in Missouri:

Tall fescue 3 - 4

Kentucky bluegrass 2-3

Fescue/bluegrass lawns - 3.0 to 3.5 inches.

Bluegrass/ryegrass lawns - 2.5 to 3.5 inches.

Creeping red fescues -3.0 to 3.5 inches

Buffalograss 2-3

Bermudagrass 2-2.5

Zoysiagrass 2-2.5

There may be some benefits gained by adjusting mowing heights WITHIN the recommended range at times. For example, it is a good practice to mow warm-season grasses at the higher end of recommended heights during late summer and early fall because this practice should help them store more carbohydrate reserves for the winter, and it may reduce the incidence of certain cool-weather diseases. Mowing warm season grasses at the lower end of the range in the spring removes the dead material and speeds the green up of the lawn in the late spring. But the rule to remember is to stay within the recommended height range for your species.

Many homeowners believe grass clippings need to be removed to have a healthy, vigorous lawn.

By following the steps in the “Don’t Bag It” lawn care program, you can have a beautiful lawn

without collecting your grass clippings. See MU Guide 6959 – Don’t Bag It Lawn Care.

Regardless of how high you are mowing, it is important to keep mower blades sharp to cut grass

cleanly and evenly. Dull cutting blades can tear and shred blades of grass and may fail to cut

tougher stems and weeds. These jagged, ripped edges will turn brown as they will not heal as

quickly as a cleanly cut blade of grass. This slower healing and jagged edge can also make it

easier for diseases to creep into your lawn. A sharp blade is critical for a healthy lawn.